AC UNIT INSTALL  
blank
Diamond Chain Technology™ allows ICS® concrete chain saws to create openings less than 2’ (60 cm) square in less than 20 minutes, with square corners and no finish work required. Ring saws, on the other hand, come with several limitations. Unlike ICS concrete chain saws, plunging is not possible and the smallest opening is 14” (35 cm). In addition, square corners are only possible to 6” (15 cm) deep without grinding or chipping.
blank blank blank
blank Small Openings  
  Egress Windows  
  Concrete Pipe Tap  
  HVAC & Electrical  
  Pool Skimmer  
  AC Unit Install  
  Mechanical Openings  
1. Score the entire cut, plunging the bar 1” (2.5 cm) into the concrete

- 3 minutes.		 AC Unit Install - Step 1
 

2. Plunge the saw all the way into the cut, starting on the bottom first. Use the same technique to finish the remaining three sides, ending with the top

- 12 minutes.

 AC Unit Install - Step 2
  3. The AC Unit is installed with less than 1/4” (.64 cm) gap on all sides, with perfectly square corners, a clean finish, and no chance for leaks. AC Unit Install - Step 3
 

Note: Pay attention to the sequence of cutting to avoid pinching the bar in the cut. Always start with the bottom cut first. Proper alignment of the score cut will help ensure straight cutting when at full depth.

Total elapsed time: 15 minutes.

Important - concrete weighs as much as150 lbs per cubic foot (2371 kg/cu. meter). Pay attention when removing cores larger that 1’/sq (.3m/sq) in diameter. Whenworking from elevated location, it may benecessary to strap core when cutting toavoid losing core prematurely.

 AC Unit Install - Completed
 
 

HOME | PRODUCTS | SALES | SERVICE | COMPANY | CONTACT
 

© Copyright 2010 ICS, Blount Inc.
Privacy Statement Specifications subject to change without notice.
Concrete Saws • Diamond Chain Technology • Concrete Cutting Accessories